--Ref#: 103069

Click here to Contact us about this item
Photo: View Photo



36" x 10,000 lb x 4" dia arbor SECO Slitting Line


Seco uncoiler order #76410A date: 7/77
36" mandrel length
10,000 lb capacity
Coil od:  60"
ID max 20" / ID min. 16"
Traversing base
Mandrel expansion and rotation thru
Winsmith gearmotor to chain drive
1.5 hp / 230/460 volt / 8 63 rpm (1725 rpm)
Hydraulic and electric connection 
Wichita air clutch

Slitting head shop order #76410-E
Hand wheel dual adj of top arbor
Threading drive 208/230/460  3 ph / 60 cycle
1.5 hp / 1730 rpm
Hydraulic valving and pump for rotation, mandrel expansion / traverse
40" arbor length x 4" dia 
8" knife od / 6.5" id

Capacity in Aluminum: 18 cuts in .048" / 4 cuts in .150"
Capacity in steel:    9 cuts in .048" / 2 cuts in .150" 

Bridle roll stand (missing one roll)

North American Mfg Co H3137 Pulsed Flourescent 
Automatic Edge Guide for Uncoiler

Yoder Recoiler 
DC 40 hp          650       2000
500               67.5
150/200           18/72
Drum 16" od x 38" o.a. (36" nominal width)
Free standing overarm, welded to recoiler base.
Spacers on overarm

Seco coil car order #77428
Table width: 40"
Front edge of table to center of "V" is 14"
Front edge to back plate: 51"
Capacity: 10,000 lbs

Scrap winder
16" between housings
Hyd traverse
powered by central hydraulic motor-pump unit

Knives 4" id
Keyway + wide x " depth
Quantity 140
Crate of rubbers & spacers

Located: Rockford, IL in storage

 

 


About StrongMach | Features | Catalog | Contact

Copyright 1998 StrongMach, Inc.